Anzeige
Erschienen in:
19.08.2023 | Original Article
Monte Carlo simulations of organ and effective doses and dose–length product for dental cone-beam CT
Erschienen in: Oral Radiology | Ausgabe 1/2024
Einloggen, um Zugang zu erhaltenAbstract
Objectives
The use of dental cone-beam CT (CBCT) has increased in recent years. We aimed to calculate the organ and effective doses in dental CBCT using Monte Carlo simulation (MCS) and to correlate the effective dose with the dose–length product (DLP), which is a radiation dose index.
Methods
Organ and effective doses were calculated by MCS using the adult male and female reference phantoms of the International Commission on Radiological Protection publication 110 in a half-rotation scan of the CBCT scanner Veraviewepocs 3Df. The simulations were performed by setting nine protocols in combination with the field-of-view (FOV) and imaging region. In addition, DLPs were calculated by MCS using the virtual CT Dose Index (CTDI) and CBCT phantoms, with the same protocol.
Results
The effective doses were 55 and 195 μSv at the minimum FOV of Φ40 × H40 mm and maximum FOV of Φ 80 × H80 mm, respectively. The organs with the major contribution to the effective dose were the red bone marrow (11.0‒12.8%), thyroid gland (4.0‒12.7%), salivary gland (21.8‒33.2%), and remaining tissues (35.1‒45.7%). Positive correlations were obtained between the effective dose and calculated DLP using the CTDI and CBCT phantoms.
Conclusions
Organ and effective doses for each protocol of dental CBCT could be estimated using MCS. There was a positive correlation between the effective dose and DLP, suggesting that DLP can be used to estimate the effective dose of CBCT.